Showing posts with label world of light. Show all posts
Showing posts with label world of light. Show all posts

Friday, November 15, 2013

Why is UV light harmful to us?

Filled under:


Ultraviolet or UV light has a shortest wavelength than visible light, so we cannot see it. Ultraviolet radiation possess highest energy than visible light, and are responsible for causing our sunburns. UV light can cause some type of skin cancers also. UV light can be reflected strongly from the surface of water, and from white surfaces such as snow, and can cause snow- blindness. It is always better to wear protective goggles or sunglasses that filter out the UV light to prevent serious eye damage.

Though some UV rays from the Sun penetrate Earth's atmosphere, most of them are blocked from entering by various gases like ozone. however, increasing damage done to the ozone layer in the Earth's upper atmosphere means that more and more UV light is now reaching the surface of the Earth. This is dangerous to us.

Posted By Latansa Travel1:07 AM

Thursday, November 14, 2013

Why do things glow when they are very hot?

Filled under:


When an iron bar is heated to a very high temperature, it initially glows red, and then as its temperature rises, it glows white.  This process is called incandescence. Incandescence is heat made visible when heat energy turns into light energy. Why does this happen?

Everything around us gives off both heat and waves of light called infrared light, which we cannot see. Even things that we think of as being very cold, like an ice cube, gives out some heat. As an object becomes warmer, its atoms emit much more wave energy, and the waves it produces become shorter and shorter. if it is warmed enough, the shorter waves will give off visible light as the object starts to glow.

When an object heats up, first it glows red, and then white when it becomes really, really hot. to put it in a nutshell, everything glows, not just hot objects.

Most things glow in the infrared frequencies, which human eyes can't see. When an object gets hot enough, it glows in the visible light frequencies, which we can see, and then we say that it is 'red-hot' or 'white - hot'!

Posted By Latansa Travel3:10 AM

Wednesday, November 13, 2013

what are the advantages of LED's?

Filled under:



Light emitting Diodes or LED's are basically just tiny light bulbs that fit easily into an electric circuit. however, they don't have a filament that will burn, and get hot while producing light.

        A diode is an electrical component with two terminals which conduct electricity only in one direction. Connecting a diode, making them release photons, which conduct electricity only in one direction.connecting a diode,making them release photons, which we see as light.

      In the search fao energy-efficient lighting LED's have proven to be LED's use atleast 75 percent less energy than traditional incandescent bulbs, and last 25 times longer.  LED's don't require, or mit great amounts of heat.

# Post No 407 : Sent by B. Sunil ( VIII Class )

Posted By Latansa Travel4:44 AM

Tuesday, November 12, 2013

What is bioluminescence?

Filled under:



The bodies of some living organisms like fireflies and glowworms- are able to give off visible light. This phenomenon is known as bio luminescence. Glowing animals create light by mixing chemical compounds in their bodies to produce light. This ability to produce light is most common among insects that fly at night, as they use light to communicate.

In the depths of the ocean, there us no natural light; so many deep-sea fish produce their own light. The angler fish and the flashlight fish have special light- producing bacteria in their bodies. The angler fish has a spine with a bulb at the end that it dangles in front of its mouth. It can switch the glow on and off by increasing or reducing the flow of blood to the bulb.

Amazing isn't it is?

Posted By Latansa Travel3:44 AM

Monday, November 11, 2013

Why is a camera similar to a human eye?

Filled under:


why camera similar to human eye

The Human eye is a wonderful instrument that relies on refraction and lenses to form images and a camera is similar to it in many ways. The shutter in a camera has the same function as the pupil of the human eye. The pupil is the tiny opening at the center if the iris, which is the colored area of the eye. The purpose of both the shutter and the pupil is to let in light.
The pupil can expand or contract to adjust the amount of light that enters- and a camera's shutter can be adjusted too.

Next, we come to the cornea which is the 'cap' of the eye. It is transparent, sits at the front of the eye, and has a spherical curvature. The lens of a camera is also transparent as it is made of glass. it too is located in the front of the camera, and has a spherical curvature. The lenses of both the eye and a camera can focus and project an upside down image of an object before them.

In a camera, film is used to capture an image. In the eye, the image is focused on the retina, which in turn, converts the image to electrical impulses and sends the information along the optic nerve to the brain.

Posted By Latansa Travel10:29 PM

What are the different types of electric lights?

Filled under:



Today, these are many different types of electrical lights. In incandescent light, a bulb glows when electric current heats up a filament placed inside a glass bulb, to produce a yellowish - white light.

in fluorescent lights, an electric current is passed through mercury vapor inside a glass tube. the vapor gives off UV light that is absorbed by phosphor powder coated on the inside of the tube, to produce a visible blue - white light.

Another type of lighting is strip a phosphor coating making it fluorescent, so that it produces light. The color of the type of gas that is used. Alternatively, metal vapors can be used instead of a gas. For example, mercury vapor glows yellow. Sodium vapor lights are sometimes used in street lighting.

Posted By Latansa Travel12:27 AM

Sunday, November 10, 2013

Why is the history of electric light fascinating?

Filled under:



For thousands of years, people all over the world have been fascinating by lightning. In 1752, a genius named Benjamin Franklin conducted an experiment to prove that lightning was caused by electricity. Throughout the next hundred years, many inventors and scientists tried to find a way to use electrical power to make light.

In 1800's Humphrey Davy, an English scientist, experimented with electricity, and invented an electric battery. When he connected wires to his battery and a piece of carbon, the carbon glowed, producing light. This is called an electric arc.

Later, the English physicists Sir Joseph Wilson Swan demonstrated his new electric lamps in England. These lamps used a carbon filament inside a glass bulb to produce incandescent light. However, it was the inventor Thomas Alva Edison's lamp that became the first commercially successful incandescent lamp. In 1910 William David Coolidge lasted even longer that the older filaments. This incandescent bulb revolution ed the world.

Posted By Latansa Travel11:43 PM

Why are black holes black?

Filled under:



Black holes are one of the most mysterious and powerful forces in the universe. They are formed when giant stars explode at the end of their lifestyle. This explosion is called a supernova. if the star has enough mass, it will collapse on itself, down to a very small size. Due to its small size and enormous mass, its gravity will be so strong that nothing can escape from it- even light. Instead, all light is absorbed, and a black hole is formed.

Black holes can grow incredibly huge as they continue to absorb light and mass around them. They can even absorb other stars. We can't actually see black holes because they don't reflect light, but scientists know they exist by observing light and objects around black holes. A simple way to put it is that a black hole is a point in space where something exists, but because of its extreme gravity, light cannot escape from it, and so, it is not visible under any conditions.

Posted By Latansa Travel10:58 PM

Saturday, November 9, 2013

why does the sun look red at sunset?

Filled under:



We have all enjoyed the beauty of glorious sunsets, when the Sun appears to be a fiery red. Why is the Sun, which is blazing white at noon, red at sunset? It is because sunlight or what we call ' white light' is made up of different colors, each having a different  wavelength.

During a sunset, the sun's rays are slanting, and they pass through a much longer path in the lower atmosphere. The lower layers of the atmosphere have many more of the tiny particles called aerosols that are suspended even in the cleanest of air. Aerosols come from many sources like soil, salt from the ocean, plants, the burning of fossil fuels or vegetation.

As the lower layers of the atmosphere have more aerosols, their scattering effect is magnified. This results in more red light being scattered towards you than any of the other colors... and in blazing sunsets.

Posted By Latansa Travel11:09 PM

Why do soap bubbles shimmer?

Filled under:



Don't you love to watch and catch soap bubbles as they float in the air? Whether they are blown from a plastic pipe, or lathered between your hands, the bubbles seem to shimmer with colors that shift between blue, red, and purple as they encounter even small amounts of light.

the reason they do so is because of the properties of light. when light rays move from one transparent medium to another in this case, from air to the bubble- some rays go through, and some rays bounce back, or are reflected. these light rays bend at the point where air meets  the bubble.

When light bends, it is called refraction- and refraction is what causes soap bubbles to be colored. the more the light ray bend, the blue rays from the spectrum will become visible to the human eye. Smaller bends make the red parts of the spectrum visible. In effect, the surface of the bubbles acts like a prism that separates the various light rays into their individual wavelengths, and these appear to us as shimmering colors.

Posted By Latansa Travel10:59 PM

Who discovered refraction?

Filled under:



The Egyptian geographer Ptolemy who lived between 90 and 168AD tried to explain the phenomenon, but was not entirely successful.

however, the actual law of refraction was discovered in the early 1600s by a dutch mathematician Willebrord Snel Van Royen. He explained that when light travels from one medium to another, it generally bends, or refracts. The bending is caused by the differences in density between the two substances, which in turn affect the speed at which light travels through them. Snel's explanation of refraction is still known as 'Snell's law'.

Posted By Latansa Travel10:37 PM

Why does a spoon appear bent when placed in a glass of water?

Filled under:



place a spoon in an upright position in a round glass of water. Now, move it slowly from the middle of the glass to the side. You will see that spoon appears to get bend or broken. This illusion occurs because of a phenomenon called the refraction of light.

Refraction takes place when light passes at an angle from one transparent medium to another,  for example from air to water.

We know that light travels in a straight line, but when a ray of light hits the water at an angle, its speed changes. This cause a change in direction. So, the light is bent- and then continues in a straight line.

When the spoon is straight up in the glass, it appears straight , because when light hits the water square on, it will pass straight through, and will not be refracted or bent. So, there is no distortion . However, when we move the spoon sideways, the light from the spoon hits the water at an angle so it is refracted or bent, and the part of the spoon under water appears in an different location. The result is the illusion of a bent spoon.

Posted By Latansa Travel10:21 PM

Why are concave mirrors different from convex mirrors ?

Filled under:



A concave mirror has an inward curved surface, like the inside of a spoon. Because of its curved shape, light rays are focused at a point in front of the mirror's surface.

Depending on where an object is placed, a concave reflecting surface can reduce and invert an image, or enlarge an image. So, if you stand in front of a concave mirror, you will notice that that the reflected image is reduced or inverted. if you move closer, your image turns over, and becomes enlarged. Concave mirrors have many uses. These include vanity mirrors that enlarge a person's face, the mirror used by dentists, and those used in reflecting telescopes.

A convex mirror has an outward bulging reflecting surface. A convex surface only reduces the size of a reflected image- it does not invert it, regardless of where an object is placed in front of it. A convex mirror allows a wider area to be seen, and its many uses include rear view mirrors in automobiles, and mirrors in stores that are used for security purposes.

Posted By Latansa Travel2:18 AM

What are mirrors?

Filled under:


Mirrors are surfaces that show you exactly what you place in front of them. they were originally made of polished metal, but nowadays, they are made of glass with a metallic or silvery coating.

When light rays hit a mirror, because the surface is smooth and shiny, they are reflected in the same direction, and not scattered at all. As a result, you get a clear image that is an exact copy of the object. The image in a mirror is inverted this means that the left side of your face is the right side of the image.

Most mirrors are flat,  but there are convex mirrors make the image seem smaller, so that a larger area can be seen. Concave mirrors, on the other hand, make the image seem larger.


Posted By Latansa Travel2:06 AM

Friday, November 8, 2013

what are transparent and opaque substances?

Filled under:



When beam of light hits an object, three things can happen. It will either pass through it, be reflected off it, or be absorbed by it. Transparent materials are those that allow light to pass through them. We can see clearly through transparent materials like water and glass. Sometimes, however, the surface of even a transparent material such as glass can be reflective, and light will bounce off it. Some materials known as translucent materials known as translucent materials allow light to come through, but we cannot see through them.

objects through which light cannot pass are called opaque objects. When a ray of light hits an opaque object, it will be reflected in all directions, and the light is said to be scattered. The reflected light reaches our eyes, and allows us to see the object. A shadow will be cast behind the opaque object, where the light cannot reach.

Posted By Latansa Travel6:27 AM

How is rainbow formed?

Filled under:


Rainbows appear magical, but there is a simple explanation for their sudden appearance and breathtaking beauty.

Simply saiyng, a rainbow occurs when sunlight is reflected and refracted by the water droplets in the atmosphere. the lower the Sun is in the sky, the higher the arc of the rainbow will be.

How is a rainbow made? well, you know that sunlight looks white, but it's really made up of different colors.. red, orange, yellow, green, blue, indigo, and violet. When white sunlight passes through rain drops, the raindrops act like tiny prisms. they bend the different colors in white light, so the light spreads out into a band of colors- red, orange,yellow, green, blue, indigo and violet- the colors of a rainbow.

Posted By Latansa Travel4:55 AM

What is an optic illusion?

Filled under:




An optic illusion is a way of tricking the brain to see something that may not be there. the humans brain puts images together because it has learned to expect certain things- and sometimes, the data gets confused.

For Example, on a sunny, hot summer day, when you happen to be on a long, straight road, take a look at the surface of the road up ahead of the car. it often appears that there are pools of water on the road. what you are actually seeing is an optical illusion called a mirage.

The reason for this illusion is that under certain conditions, usually on hot sunny days, light beams bend when they hit the hot air close to the ground. instead of reaching the ground, they bounce up toward your eyes. what you see is a mirror image of something on the ground, a reflection that looks like a puddle.

Posted By Latansa Travel4:43 AM

Why do we see color?

Filled under:


Renowned researchers, Thomas Young and Hermann Von Helmholtz, contributed to the tri chromatic or three color theory of color vision. According to Young, we see color because of the actions of three different receptors.

Helmholtz explained that all three types of receptors reacted to all colors, but in varying degrees, and that it was the total 'sensation' received by the brain that determined the colors actually seen.

Another theory was put forward by Ewald Herring.He theorized that the retina's receptors are mere absorbers of light, and that color discrimination begins in the coding mechanisms located farther along the optics system. Instead of color being comprised of three basic colors, he suggested humans perceive color based on six primary colors. This theory is widely accepted today.

Posted By Latansa Travel3:54 AM

Thursday, November 7, 2013

Why is the history of microscope interesting?

Filled under:


It was the Romans who first invented glass, and discovered that if a piece of a certain type of glass that was thick in the middle and thin on the edges was held over an object look larger. This was the first primitive 'lens'.

the early lenses were called magnifiers or burning glasses. In the 13th century, spectacle makers started producing lenses to be worn as glasses. Sometime about the year 1590, two dutch spectacle makers, Zacharias Jansen and his father Hans invented the compound microscope that uses two or more lenses.

Galileo, the great Italian scientist, improved the microscope by adding a focusing device to it. Antonie Van Leeuwenhoek of Holland found that by  grinding and polishing, he was able to make small lenses with great curvatures. These rounder lenses produced greater magnification. his new improved microscope was able to see things that no man had ever seen before, and he is often called the father of Microscopy'. Robert Hooke, an Englishman, also improved microscopes.

Posted By Latansa Travel3:07 AM

Why is the history of telescope an interesting one?

Filled under:


In 1609, the Italian scientist Galileo first peered through his small homemade telescope at the stars. since then, telescopes have increased our knowledge of the heavens by leaps and bounds.

The first telescopes used to peer into space were refracting telescopes. this means that you would look straight through the telescope from one lens to the other, to the image you were looking at. However, lenses used in these telescopes were blurry. It was soon discovered that if the telescope lenses were further apart, they would show a clearer image, and then telescopes began to get really long.

In the 1680's Isaac Newton designed a successful reflecting telescope. this type of telescope had a mirror inside that would reflect the image to a focus point. Newton found that this made the images of space much clearer to the viewer. since that time, humans have raced to build bigger and better telescopes.

nowadays, there are many different types of telescopes. there are radio telescopes, X- ray telescopes, infrared telescopes, gamma ray telescopes and ultraviolet telescopes.

Posted By Latansa Travel2:53 AM